Directional Antenna Directive 4 ELEMENTS 300-600MHz mod. ARYCK-E-48XA - ARYCK-E-48XI - ARYCKM-E-48XA - ARYCKM-E-48XI - Antennas kit Professional antennas in an Assembly Kit

Protel Antennaskit.com 34 years - 2022
Antenna
Kit
Professional antennas
by
Menu
Go to content

Directional Antenna Directive 4 ELEMENTS 300-600MHz mod. ARYCK-E-48XA - ARYCK-E-48XI - ARYCKM-E-48XA - ARYCKM-E-48XI

Freq. 300-600 MHz
Directional antenna UHF yagi 4 elements 300 600 MHz Antenne directionnelle yagi 4 éléments 300-600MHz Antena Direccional yagi fm de 4 elementos 300-600MHz
Antenne UHF 300-600MHz 300-600MHz Antenne directionnelle UHF yagi 4 éléments 300-600MHz Antena Direccional UHF yagi fm de 4 elementos 300-600MHz 400mhz 401mhz 402mhz 403mhz 404mhz 405mhz 406mhz 407mhz 408mhz 409mhz 410mhz 411mhz 412mhz 413mhz 414mhz 415mhz 416mhz 417mhz 418mhz 419mhz 420mhz 421mhz 422mhz 423mhz 424mhz 425mhz

Directional antenna UHF yagi 4 elements 300 600 MHz  - PRODUCT PROFESSIONAL - AntennaKit

IT IS POSSIBLE TO EQUIP THE ANTENNA WITH A PROTECTION RADOME.

WE RECOMMEND USING THE RADOME IF THE ANTENNA IS INSTALLED IN AREAS WITH HEAVY SNOWFALL.
ELECTRICAL  DATA TYP.
Frequency range A MHz 300÷ 600
Bandwidth MHz 30
Gain  max. dBi 10.2
Return loss dB ≥-14
VSWR ≤1.5:1
Nominal impedance Ω 50
Polarization V/H
H beamwidth      typ.   -3 dB 75°
E beamwidth      typ. -3 dB 55°
Max Power W 500
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL  DATA
Dimension length typ. mm 500X1000x100
Weight without clamp kg 1
Wind surface     typ. m² Front 0.025 side 0.08
Front wind load typ. Kg 3.5   ( 160 Km/h )
Side wind load   typ. Kg 16.5 ( 160 Km/h )
Mounting mm Ø 35 ÷ 114
MATERIALS
Stainless steel – Teflon – Brass – Aluminium 6060
ACCESSORIES
RAD30600 RADOME Polyvinyl chloride
ZAFZ25/114C CLAMP hot-dip galvanizing Weight 1.9 Kg
ORDERING AND PACKAGING INFORMATIONS
ARYCKM-E-48XA ALLUMINIUM DIPOLE  ELEMENTS
ARYCKM-E–48XI STAINLESS STEEL DIPOLE AND ELEMENTS
TYP.PACKAGING cm.1000x180x180 / Total weight with clamp 3.5 Kg
IMPORTANT:


THE ANTENNA IS CALIBRATED ON THE FREQUENCY REQUESTED BY THE CUSTOMER.
ENTER THE REQUIRED CALIBRATION FREQUENCY IN THE ORDER NOTES.

POWER 500W ALUMINUM
4 ELEMENTS DIRECTIONAL
300-600MHz Nf=500W
Boom: STAINLESS STEEL
Material elements: ALUMINUM
TESTED AND PRE-ASSEMBLED
Immediate availability
205.90 €(VAT excl.)
Add
POWER 500W STAINLESS STEEL
4 ELEMENTS DIRECTIONAL
300-600MHz Nf=500W
Boom: STAINLESS STEEL
Elements Material: STAINLESS STEEL
TESTED AND PRE-ASSEMBLED
Immediate availability
216.90 €(VAT excl.)
Add
ACCESSORIES
CROSS CLAMP
Galvanized Iron Fire - Weight: 1.9 Kg.
Mounting mast Ø 35/114 mm.
Complete of:
SCREWS Ø 10 MA STAINLESS STEEL A2
NUTS Ø 10 MA STAINLESS STEEL A2
Ø 10X20 WASHERS STAINLESS STEEL A2
GROVER CUT Ø 10 STAINLESS STEEL A2
Immediate availability
46.90 €(VAT excl.)
Add
RADOME OF PROTECTION
for Antennas from 300 to 600 MHz
RADOME PRESERVES THE “GAMMA MATCH” OF THE ATMOSPHERIC AGENTS LIKE SNOW, ICE AND SALTINESS.
For Antenna Tested and Pre-Assembled
Material: Polycarbonate
Limited availability
49.00 €(VAT excl.)
Add
Led Green

The images shown are illustrative and may change without notice

Immediate Availability Subject to availability of the frequency of calibration by the Customer request

Led Red

This product is currently not on stock

426mhz 427mhz 428mhz 429mhz 430mhz 431mhz 432mhz 433mhz 433mhz 434mhz 435mhz 436mhz 437mhz 438mhz 439mhz 440mhz 441mhz 442mhz 443mhz 444mhz 445mhz 446mhz 447mhz 448mhz 449mhz 450mhz 451mhz 452mhz 453mhz 454mhz 456mhz 457mhz 458mhz 459mhz 460mhz 461mhz 462mhz 463mhz 464mhz 465mhz 466mhz 467mhz 468mhz 469mhz 470mhz 471mhz 472mhz 473mhz 474mhz 475mhz 476mhz 477mhz 478mhz 479mhz 480mhz 481mhz 482mhz 483mhz 484mhz 485mhz 486mhz 487mhz 488mhz 489mhz 490mhz 491mhz 492mhz 493mhz 494mhz 495mhz 496mhz 497mhz 498mhz 499mhz 500mhz
Immagine Protel
Back to content