VHF Yagi Antenna Directional Directive 3 ELEMENTS 108-150MHz mod. ARYCK-C-37XA - ARYCK-C-37XI - ARYCKM-C-37XA - ARYCKM-C-37XI 3 éléments Yagi antenne directionnelle, 3 elementos yagi antena direccional
Freq. 108-150 MHz
Directional antenna VHF yagi 3 elements 108 150 MHz VHF Antenne directionnelle VHF yagi 3 éléments 108-150MHz VOR, DVOR, ILS air traffic air band, aeronautical band, air control, flight control
Antena Direccional VHF yagi de 3 elementos 108-150 MHz 2 element yagi directional antenna antenne Yagi directionnelle 2 éléments Antena direccional yagi 2 elementos
Yagi directional antenna 3 elements 108-150MHz - PROFESSIONAL PRODUCT - AntennaKit
IT IS POSSIBLE TO EQUIP THE ANTENNA WITH A PROTECTION RADOME.
WE RECOMMEND USING THE RADOME IF THE ANTENNA IS INSTALLED IN AREAS WITH HEAVY SNOWFALL.
ELECTRICAL DATA TYP.
Frequency range A MHz 108 ÷ 150
Bandwidth MHz 3.5
Gain max. dBi 9.2
Return loss dB ≥-14
VSWR ≤1.5:1
Nominal impedance Ω 50
Polarization Ω V/H
H beamwidth -3 dB 90°
E beamwidth -3 dB 60°
Max Power W 700
Connector Nf
Lightning protection All metal parts are D.C. grounded
MECHANICAL DATA TYP.
Dimension length mm 1250X1300x100
Weight without clamp kg 1.4
Wind surface m² Front 0.04 side 0.1
Front wind load Kg 6.1 ( 160 Km/h )
Side wind load Kg 18.5 ( 160 Km/h )
Mounting mm Ø 35 ÷ 114
MATERIALS
Stainless steel – Teflon – Brass – Aluminium 6060
ACCESSORIES
RAD108150 RADOME Polyvinyl chloride
ZAFZ25/114C CLAMP hot-dip galvanizing Weight 1.9 Kg
ORDERING AND PACKAGING INFORMATIONS
ARYCKM-C-37XA ALLUMINIUM DIPOLE *
ARYCKM-C–37XI STAINLESS STEEL DIPOLE
TYP. PACKAGING cm. 160x18x18 / Total weight with clamp 3.5 Kg
IMPORTANT:
THE ANTENNA IS CALIBRATED ON THE FREQUENCY REQUESTED BY THE CUSTOMER.
ENTER THE REQUIRED CALIBRATION FREQUENCY IN THE ORDER NOTES.
POWER 700W ALUMINUM
3 ELEMENTS DIRECTIONAL
108-150 MHz Nf=700W
Bandwidth MHz: 3.5
Boom: STAINLESS STEEL
Material elements: ALUMINUM
TESTED AND PRE-ASSEMBLED
108-150 MHz Nf=700W
Bandwidth MHz: 3.5
Boom: STAINLESS STEEL
Material elements: ALUMINUM
TESTED AND PRE-ASSEMBLED
Immediate availability
211.90 €(VAT excl.)
POWER 700W STAINLESS STEEL
3 ELEMENTS DIRECTIONAL
108-150 MHz Nf=700W
Bandwidth MHz: 3.5
Boom: STAINLESS STEEL
Elements Material: STAINLESS STEEL
TESTED AND PRE-ASSEMBLED
108-150 MHz Nf=700W
Bandwidth MHz: 3.5
Boom: STAINLESS STEEL
Elements Material: STAINLESS STEEL
TESTED AND PRE-ASSEMBLED
Immediate availability
228.90 €(VAT excl.)
ACCESSORIES
CROSS CLAMP
Hot dip galvanized iron
Weight: 1.9 Kg.
Mounting mast Ø 35/114 mm.
Complete of:
SCREWS Ø 10 MA STAINLESS STEEL A2
NUTS Ø 10 MA STAINLESS STEEL A2
Ø 10X20 WASHERS STAINLESS STEEL A2
GROVER CUT Ø 10 STAINLESS STEEL A2
Hot dip galvanized iron
Weight: 1.9 Kg.
Mounting mast Ø 35/114 mm.
Complete of:
SCREWS Ø 10 MA STAINLESS STEEL A2
NUTS Ø 10 MA STAINLESS STEEL A2
Ø 10X20 WASHERS STAINLESS STEEL A2
GROVER CUT Ø 10 STAINLESS STEEL A2
Immediate availability
46.90 €(VAT excl.)
RADOME OF PROTECTION
for Antennas from 108 to 150 MHz
RADOME PRESERVES THE “GAMMA MATCH” OF THE ATMOSPHERIC AGENTS LIKE SNOW, ICE AND SALTINESS.
For Antenna Tested and Pre-Assembled
Material: Polycarbonate
for Antennas from 108 to 150 MHz
RADOME PRESERVES THE “GAMMA MATCH” OF THE ATMOSPHERIC AGENTS LIKE SNOW, ICE AND SALTINESS.
For Antenna Tested and Pre-Assembled
Material: Polycarbonate
Limited availability
49.00 €(VAT excl.)
The images shown are illustrative and may change without notice
Immediate Availability Subject to availability of the frequency of calibration by the Customer request
This product is currently not on stock
108MHz 109MHz 110MHz 111MHz 112MHz 113MHz 114MHz 115MHz 116MHz 117MHz 118MHz 119MHz 120MHz 121MHz 122MHz 123MHz 124MHz 125MHz 126MHz 127MHz 128MHz 129MHz 130MHz 131MHz 132MHz 133MHz 134MHz 135MHz 136MHz 137MHz 138MHz 139MHz 140MHz 141MHz 142MHz 143MHz 144MHz 145MHz 146MHz 147MHz 148MHz 149MHz 150MHz
